Easy-to-Use System

The Brink's Home Security standard and premium keypads are made to exacting quality specifications and use a design that assures ease of use. Most actions require only one touch, including the ON, MOTION OFF, INSTANT and EMERGENCY buttons. Other home alarms can require complicated button sequences to use the keypad. Install Now!

View keypad demonstration

On Button Activate the home alarm by simply pressing the "ON" button. Motion Off Button Deactivate the motion sensor when pets or residents are moving inside the home by simply pressing the "MOTION OFF" button. Instant Button Setting the "INSTANT" feature requires only one touch as well. This feature immediately triggers the home alarm upon intrusion detection. Options Button This button allows you to test, customize and receive information about the status of the home alarm. One-Touch Emergency Buttons The Brink's keypads are also equipped with one-touch emergency buttons for fire, medical and police. In the event of an emergency, you can trigger the alarm by pressing the fire, medical or police emergency button. Fire emergency* When pressed, the fire emergency button activates the fire alarm. The siren sounds and a signal is sent to Brink's Alarm Monitoring Center. Brink's Home Security, in turn, notifies the fire department, then calls you to verify the alarm**. Medical emergency When pressed, the medical emergency button activates the medical alarm. The keypad beeps, but the siren does not sound. Brink's Home Security calls you to verify the alarm. If no one answers the call, Brink’s contacts the emergency agency. Police emergency* When pressed, the police emergency button activates the main alarm. The siren sounds and a signal is sent to Brink's Alarm Monitoring Center. Brink’s calls you to verify the alarm, then notifies the police department.

View keypad demonstration

*Not available in commercial or multifamily installations.
**In some jurisdictions, the verification call is made prior to calling the fire department.